Skip to main content
KitchenAid Product Help

Attach and use the pouring shield

Attach the Pouring Shield

1.Make sure the speed control lever is set to the OFF/0 position.
2.Unplug the stand mixer.
3.Attach desired accessory and raise the mixing bowl.
4.Slide pouring shield collar around beater shaft, centering collar over rim of bowl.

 

Use the Pouring Shield

 

Pour ingredients into the mixing bowl through the chute portion of shield.


IMPORTANT: Make sure the guides on the bottom of the chute rest on the rim of the bowl to keep ingredients from falling outside the
bowl as they are added.

 

Remove the Pouring Shield

 

1.Make sure the speed control lever is set to the OFF/0 position.
2.Unplug the stand mixer.
3.Remove pouring chute from collar.
4.Slide pouring shield collar off bowl.
5.Lower the bowl support by turning the bowl-lift lever clockwise (if bowl lift)
6.Remove accessory and the mixing bowl.

 

Clean the Pouring Shield

 

Wash in warm sudsy water. If you wish, you may place on the top rack of your dishwasher.

 

  • Was this article helpful?