Can you hear a clicking noise?
Only the burner with the control knob turned to IGNITE/FLAME will produce a flame.
NOTE: Visually check that the burner has lit. If the burner does not ignite, listen for the clicking sound. If you do not hear the igniter click, turn off the burner. Check for a tripped circuit breaker or a blown fuse.
Is the burner wet or damp?
- Burner(s) may click if damp from being cleaned or if a spillover has occurred.
- Allow the product to dry thoroughly.
- You can speed up the drying process by blowing cool air on the burner and the control knob shaft area using a hairdryer.
Products equipped with the reignition feature:
- During cooktop use, if one or more burners are extinguished due to external causes (such as a water spill, wind, or ventilation draft), the ignition system will turn on to reignite the flame.
- When the flame comes back on, the system will stop sparking, or clicking.
- If the draft in the room is not removed, occasional sparking, or clicking, may continue. Sparking may also occasionally occur when using the low setting on a burner.
Still need help? Contact us or schedule service.
Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.
Interested in purchasing an Extended Service Plan?
Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.