Skip to main content
Product Help | KitchenAid

Burner Cap (Spreader) Installation - Commercial Range

Possible Solutions

Verify that the burner cap (spreader) is installed correctly

If the spreader is not installed correctly, the flame will not emit an even heat. It could have specific hot spots, where the flame is large in one area.

NOTE: the igniter is located on the left side of the oval burner. The spreader has a small opening that must face the left side. That small opening sits very close to the igniter. See pictures below. 

The image on the left is correct installation; the right pictures show various ways to incorrectly install the spreader:

Fish Burner instructions.jpg

CLICK HERE  to watch a video on proper installation of the oval burner


  • Was this article helpful?