Skip to main content
Product Help | KitchenAid

Feature Not Available or Fault Detected - Gas and Dual Fuel Range

Possible Solutions

Follow the displayed directions “PRESS ENTER TO TRY AGAIN” or “DISABLE POWER TO CLEAR.”

This message will scroll across the display when a fault is detected while you are programming a cook cycle.

Reset power to the product:

  • Power unit down by turning off the circuit breaker(s) for one (1) minute.
  • Power unit up by turning on the circuit breaker(s).
  • Start a bake cycle.
  • Monitor the oven for one (1) minute to ensure the error code does not display again.
  • Verify oven operation.