Skip to main content
Product Help | KitchenAid

F3 E4 - Wall Oven

Possible Solutions

This error code be caused by either a dislocated meat probe or power attachment (depending on model number)

Was the probe being used?

If the meat probe was being used verify it is securely inserted in the meat probe receptacle. Location of the meat probe may vary.  See the Owner's Manual for specific location and instructions. 

Meat Probe.jpg

Was the power attachment being used? 

If one of the power attachments were being used when the error codes displayed, the attachment may have come unplugged. 

  1. Roll-out the rack
  2. Ensure the power attachment is in the correctly location
  3. Firmly push the roll-out into the oven.  A tone will sound when the rack is in place. 

CLICK HERE for additional information on installing the power attachment

Reset power to the product:

  • Power unit down by turning off the circuit breaker(s) for one (1) minute.
  • Power unit up by turning on the circuit breaker(s).
  • Monitor the oven for one (1) minute to ensure the error code does not display again.
  • Verify oven operation.

Still need help? Call or schedule service.

You may need assistance from a qualified technician. Call 1-800-422-1230 or click below to schedule an appointment.

 

  • Was this article helpful?