Using a Preset Grain Cycle - Grain and Rice Cooker

Using a Preset Grain Cycle

IMPORTANT: The Ceramic Pot will be hot. To remove, use pot holders.

Turn the Power Switch to the ON (I) position, located on the left side of the appliance.
Select the Grain type by tapping the selection on the screen.
Add the desired grain to the Ceramic Pot. The Grain and Rice Cooker will automatically sense the weight of the food as you pour it into the Ceramic Pot. Liquid should not be added at this step, as it will alter the weight scale's performance. TIP: While on the weight screen, the units of measure (cups/oz/g) can be changed by tapping the 3 dots on the right.
If the food has already been added, remove the Ceramic Pot for 3 seconds and reinsert the pot in the cooker. NOTE: Adding food without selecting the cook mode first will limit the unit of measurement to ounces or grams only. Cups are not available with this method. For best results, level the food inside the pot for even cooking.
Select grain preparation, liquid type, and grain texture on the screen
If too little food is added, the letters will flash red and the message “Please add more food to the pot” will appear. Once completed, the scale screen will appear.
Follow the on-screen prompts and slowly add your water or cooking liquid until you reach your desired texture.
Close the Lid and tap the START option.
When cooking is about to complete; a countdown timer will appear and audibly notify you when cooking has been completed. When finished, the Grain and Rice Cooker will automatically switch to KEEP WARM mode for 6 hours.