Installing the Reversible Slicing/Shredding Disc

How to Install the Reversible Slicing/Shredding Disc

1. To slice: Turn the disc so that the raised slicing blade is facing up.
   To shred: Turn the disc so that the small, raised shredding blades are facing up.

The disc can be placed in two different positions: level with the top of the bowl for processing, and lower, inside of the bowl, for storage.
NOTE: While the disc will operate in storage position, it will not perform as well. Make sure the disc is level with the top of the bowl for best performance.

2. Hold the disc by its center hub and lower it onto the drive adapter, aligning the mark on the center hub of the disc to the matching mark on the adapter. When properly placed, the disc should be level with the top of the bowl. If the disc falls to the storage position, lift it out, turn it 90°, and lower it again.

3. Install the work bowl cover, and be sure the lid latch is pushed down to the locked position.

​ ​

​ ​

​