Cleaning the Grain and Rice Cooker

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Automated Cleaning Cycles

IMPORTANT: Unplug the appliance from the outlet before cleaning. Allow the appliance to cool completely before removing/adding parts and before cleaning the appliance. Do not use abrasive cleaners or metal scouring pads. They could scratch the surface.

Descale

The DESCALE cycle utilizes water and vinegar to flush out any mineral deposits in the internal plumbing periodically (every 2-4 months).

Select the CLEAN option from the main menu.
Select DESCALE to start the cleaning cycle process.
1. Clean with a vinegar/water mix: Fill the Water Tank with vinegar to the Half line and water to the Max (maximum) line on the Water Tank.
2. Flushing the system: Fill the Water Tank with water to Half line to flush the water and vinegar solution out of the system.

NOTE: Only water or vinegar should be used in the Water Tank when cleaning. If any other liquid was used in the Water Tank to pump, please flush the pump to remove residue.

Pre-Wash Pot

The PRE-WASH POT cycle utilizes a heated soak feature to loosen or remove residue on the sides of the bowl.

Select the CLEAN option from the main menu.
Select the PRE-WASH POT mode function to start the cleaning cycle process.
Once the cycle has finished, drain the pot in the sink to continue cleaning in either the sink or dishwasher.

Manual Cleaning

Wipe the outside of the Grain and Rice Cooker with a clean, damp cloth and dry thoroughly. For stubborn stains, a non-abrasive liquid cleaner may be used.
Remove the Ceramic Pot, Inner Lid, and Steam Collector to clean.

Select “CLEAN INNER LID” under the Clean modes on the main menu to review how to disassemble internal components for cleaning maintenance.

The Ceramic Pot is dishwasher-safe, but hand washing in hot, soapy water is recommended to maximize the life of the non-stick coating. TIP: Clean the Ceramic Pot, Inner Lid, and Steam Collector after every cycle.