How to Assemble the Sifter + Scale Attachment

Installing the swivel chute

1. Lower the swivel chute into the sifter housing at an angle, aligning the marks on the swivel chute with the marks above the notches on the inside of the sifter housing. The swivel chute will be seated securely in the sifter housing and will rotate easily once it is correctly installed.

TIP: Align the handle tab on the chute with one of the notches as you lower the swivel chute into the sifter housing to line up the marks.

Installing the sifter assembly

2. Lower the sifter into the sifter housing at an angle so that the drive shaft can be inserted into the sifter housing. Once the shaft is inserted all the way, press down on the sifter, opposite of the shaft, to click it into place.

Installing the scale

3. Place the scale on top of the sifter housing with the digital scale display facing away from the Stand Mixer, and slightly left of center. Twist the scale counterclockwise until it locks into place.

Installing the ingredient hopper

4. Align the ingredient valve with the corresponding notch on the scale, and lower the hopper onto the scale until fully seated.

​

​ ​

​