Skip to main content
Product Help | KitchenAid

Attaching the Ice Cream Maker- Tilt Head Stand Mixer

How to Attach Ice Cream Maker to Tilt Head Stand Mixer

IMPORTANT: Always set the mixer to speed one before adding your ice cream base to the bowl. If the mixer is not running, the base could freeze too quickly and lock the attachment, causing breakage.

Before first use the Freeze Bowl must be washed by hand. The Dasher and Drive Assembly are dishwasher-safe.

  1. Turn the Stand Mixer OFF/0 and unplug.

Plug-unplug Stand Mixer.jpg

  1. Tilt the motor head back and remove the mixing bowl.

Tilt-Head 6.jpg

IMPORTANT: Before first use, set the freezer to its coldest setting and store the Ice Cream Bowl in the freezer for at least 15 hours. Do not pour ice cream batter into the Freeze Bowl until all parts are assembled and the mixer runs. 

  1. Place the Dasher inside the Freeze Bowl.

Tilt-Head 7.jpg

  1. Place the Freeze Bowl on the Bowl-Clamping Plate.

Tilt-Head 8.jpg

NOTE: Use the Freeze Bowl immediately upon removal from the freezer, as it begins to thaw once removed. 

Still need help? Contact us or schedule service.

Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.

Interested in purchasing an Extended Service Plan?

Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.

United States

  • Was this article helpful?