How to Change Inner Light Settings of Dishwasher

Light in Tub

Using this feature you can turn the inner light on and off. The inner light is On by default. Follow the below instructions to enter into the menu to change your current settings.

1. Press and hold the “Hi Temp” button for 5 seconds until “Hi Temp” and “Dry” lights turn on.
2. Press the “Start/Resume” button within 2 seconds. If you do not press Start within 2 seconds, then the display will turn off and you will need to start over and go back to
   step 1.
   a.     For Models with a Display, an “A” will show in the display to indicate Rinse Aid Level.
   b.     For Non-display models, “Tough or Cookware” light will turn on to indicate Rinse Aid Level.
3. To go to a feature other than Rinse Aid Level, press the “Cycle” button or “Normal” button (depending on model) to move to the feature you would like to change (Sound Level, Light in Tub, Kosher Friendly, Factory Reset, Rinse Aid Level). See the table in Owner's Manual for what is shown on the display to indicate these features.
   NOTE: “Cycle” buttons differ between all models. Reference your unit's display and Owner's Manual for details.

4. Press the “Start/Resume” button to select the feature and enter the sub-menu. The display will change to show the current setting of the feature (For example, if you selected Light in Tub and you haven’t changed it before, then L1 will show for display models and sensor will light for non-display models).
5. Press “Cycle” button or “Normal” button (depending on model) to change the value of the feature setting (For example, if you want to turn the light off, then press the “Cycle” or “Normal” button and L0 shows on display models or “pots and pans” lights for non-display models).
6. Press the “Start/Resume” button to confirm the new selection. The feature setting will not be changed until the “Start/Resume” button is pressed.
   The dishwasher will return to the Off state when the “Start” button is pressed.

To exit the customer settings menu at any time, press the “Cancel” button, or wait 30 seconds without pressing any buttons.

NOTE: To see the current setting of a feature, follow steps 1-4. When the “Start/Resume” button is pressed in step 4, the dishwasher will show the current setting. Press the “Cancel” button to exit without making any changes.

NOTE: If you enter into a Feature Setting Page and need to go back to the Main Menu, then Press “Cancel” and proceed to step 1.

CLICK HERE to watch a video on menu settings.

CLICK HERE to watch a video on Menu Settings: Lights ON/OFF.