Skip to main content
Product Help | KitchenAid

All Cycle And Option Lights flashing - Dishwasher

Possible Solutions

Are all cycle and options selected lights flashing?

If the door is opened during a running cycle to add an item, all cycle and options selected lights, (Select models), will flash to indicate that the cycle is suspended. Firmly close the door until it latches.

The lights will stop flashing when the door is properly shut. After a slight delay, the cycle will automatically resume at the point of interruption. 

Cycle power to the control to reset the dishwasher:

Much like a computer, resetting the dishwasher control can sometimes solve the issues you are experiencing. To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute. If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in. If the dishwasher is hard-wired to the power supply, turn the breaker off at the home electrical panel that powers the dishwasher for one minute and then turn the breaker back on.  

  • Was this article helpful?