Moving or Adjusting the Shelves - Quad Door

How to remove and replace the shelves

The shelves in your refrigerator are adjustable to meet your individual storage needs. Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open and save energy. 

NOTE: Bins and Shelves will vary by model. For information on your specific model, refer to the Owner's Manual. 

Adjusting Shelf Height

1. Carefully lift the shelf off the mounts and turn the flipper to the desired orientation.
2. Repeat for remaining shelf mounts.
3. Apply pressure to the top of the shelf to ensure the shelf is seated correctly on the mounts.
4. You must remove the middle shelf before removing the top shelf.
5. Remove the bottom shelf by lifting it up and out of its supports. Then, pull the shelf forward and tilt up to a vertical position. Turn the shelf at an angle and pull out of the refrigerator.
6. Replace the bottom shelf by putting the shelf in the refrigerator at an angle with the shelf up. Lift the front of the shelf down and in until the rear shelf drops into the shelf supports. Lower the front of the shelf and make sure that the shelf is in position.

Slide-Away Split Shelf

Some shelves will tuck away to create room for taller objects.

1. To retract the front section of the shelf, and push the adjustable portion of the shelf as far back as needed toward the rear of the refrigerator.
2. Extend the front glass and front trim of the shelf by pulling the retracted portion outward until it is fully extended.

Crisper Drawers

To remove and replace the drawers:

1. Grasp the handle at the bottom of the drawer and slide it straight out to the stop. Then, lift the drawer off the bottom guide.
2. Replace the drawer by placing it on the bottom drawer guide and pushing it past the drawer stop into position.

Refrigerator Door Bins

The bins on your refrigerator door are adjustable to meet your individual storage needs. The bins make it easy to customize door storage to hold gallon containers. Door Bin Divider (on some models) This divider fits in the door bin to divide the bin and elevate smaller items at the back of the bin.

Easy Access Tray

Easy Access tray is useful to easily access frequently used products, freeze or simply store leftovers or small items.

Freezer Drawers

The bins on your freezer door are removable to meet your individual storage needs. To maximize freezer capacity, you may remove the freezer drawer to expose the freezer shelf.

1. Grasp the handle of the drawer and slide the drawer straight out to the stop. Lift the drawer off the bottom guide. 
2. Replace/put the back drawer stop into position.