Home
Refrigeration
Ice Makers
Cleaning and Maintenance
Filter
Changing the Water Filter - Freestanding Ice Maker

Changing the Water Filter - Freestanding Ice Maker

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

When to Change the Water Filter for Your KitchenAid Freestanding Ice Maker

It is recommended that the water filter be replaced every nine months, with 2000 gallons of water used, when the indicator light comes on, or as needed. A clogged or incorrectly installed water filter will reduce the water flow to the ice maker, which could result in low or no ice production. Customers with very hard water may need to replace their filters before these counts are reached.

If the filter is clogged and you are not able to immediately replace it, leave the filter out so the water system is in bypass mode. With the filter removed, the water system will continue to operate, bypassing the filter, and the clogged filter will not cause inadequate performance.

Additional Filter Information

Replace Filter Status will remain illuminated if the filter is not installed or installed correctly or if there is an obstruction in the water line.
Replacing the disposable water filter with a new filter will automatically reset the filter status tracking feature.
Ensure the filter is in the "Locked" Position. If the filter is not "Locked," water can not enter, and no ice will be produced.

Replace Filter Status (right side on display) will remain illuminated if the filter is not properly installed or if there is an obstruction in the water line.

Do more with fresh, filtered water.

Our convenient water filters reduce contaminants to provide refreshing hydration and limitless inspiration—right from your refrigerator. To purchase an

everydrop® water filter, visit your local retailer or visit everydrop® online.

Everydrop Water Filter Logo