Changing the Water Filter - Double Drawer Refrigerator

Changing the Water Filter of KitchenAid Double Drawer Refrigerator

The water filter is located through the base grille. You do not have to remove the base grille in order to change the water filter.

1. Locate the water filter cap in the front base grille. Rotate the cap counterclockwise to a vertical position and pull the cap and water filter out through the base grille.
   NOTE: There will be water in the filter. Some spilling may occur.
2. Remove the filter cap by sliding it off the end of the old filter. The cap will slide to the left or right.
   IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter.

3. Take the new water filter out of its packaging and remove the cover from the O-rings.

4. Slide the filter cap onto the new water filter. See the illustration in Step 2. With the filter cap in the vertical position, insert the new filter into the base grille until it stops. Rotate the cartridge cap clockwise to a horizontal position.