Have the door(s) been open for an extended period of time?
If the door(s) have been opened for longer than 10 minutes , the interior lights will automatically turn off. To reset the lights close all the doors and keep the doors closed for 1 minute.
Is the door switch being activated?
The interior lights in your refrigerator are controlled by the door switch. This switch is activated when the door is opened and closed. If the switch is not being engaged properly, it could cause the interior lights to remain off. The door switch location varies by model number, but in most refrigerators it can be found either near the top or bottom of the door opening.
To ensure proper door switch contact check the following:
- Refrigerator is level and doors are properly aligned
- Ensure there are no magnets or electronic devices (Speaker, CoolVox, etc) within 3 inches of the door switch
For specific installation instruction information, for your model, please see the Use and Care Guide.
Is the wiring harness unplugged?
If the refrigerator was recently moved or installed and the doors were removed, check to make sure the wiring plug is properly connected. The wiring plug can be found under the top hinge cover. For complete instructions on how to remove the hinge cover and the wiring plug, please see your Installation Instructions.
Is the refrigerator in Sabbath mode?
Sabbath Mode is designed for the traveler or for those whose religious observances require turning off the lights. By selecting this feature, the temperature set points remain unchanged, but the control panel lights, interior lights, and control audio turn off. For most efficient operation, it is recommended to exit the Sabbath Mode when it is no longer required.
If you unintentionally turn on Sabbath mode, the word “Sabbath” will light up on the display. Entering and exiting Sabbath mode varies by model, so please reference the Use and Care Guide for specific instructions for this model.
Still need help? Call or schedule service.
You may need assistance from a qualified technician. Call 1-800-422-1230 or click below to schedule an appointment.