How to Use the Burr Grinder

Using the KitchenAid Burr Grinder

1. Select Grind Size: Refer to the Brew method icons on the machine. Rotate the Grind size knob to select a grind size within the brew method range you are using. The selected grind size will be shown on the display.
   NOTE: As grind size number increases, the actual grind size decreases (1 is Coarse, and 70 is fine).
   TIP: If Grind size knob is hard to rotate, run the machine while adjusting the size to remove any coffee grounds caught between the burrs.

2. Select Coffee Dose: Rotate the Dose selection knob for the number of cups or shots.
   French press, Perc, Drip coffee: Select between 1 - 12 cups.
   Espresso: Select between 1 - 2 shots.

3. To start grinding: Press Start/Stop to begin grinding. The grinder will stop automatically when the time reaches 0 on the display.

4. To pause during grinding: Press Start/Stop. To resume grinding press Start/Stop.
   NOTE: Grinder can remain paused for up to 15 seconds. After 15 seconds, the cycle will cancel, and the display will show the current selection.

5. To cancel the grinding cycle: Press and hold Start/Stop for 3 seconds.

6. To change the coffee amount for a dose: If desired, rotate the Time adjustment knob to customize the desired amount of coffee for a particular selected dose. Increase the grinding time to increase the coffee ground amount or decrease the grinding time to reduce the coffee ground amount.

​

​ ​

​