How to Charge the Battery

Before First Use

1. Charge the Battery until it is fully charged.
2. Clean all the parts and accessories.
3. Remove all packaging materials, if present.
NOTE: Some dust may be on the product. This is due to the recycled materials used in packaging. This can be cleaned with a soft towel.

Using the USB Cable

1. Attach the USB Cable to the Adapter. Connect the other end of the USB Cable to the Battery.

2. Plug the Adapter into a power source.

Using the Docking Station (Optional)

1. Attach the USB Cord to the Adapter.

2. Connect the Adapter to the power source.

3. Turn the Battery pack upside down and slide the Battery onto the dock. Press down the Battery and the latch will snap into place.

4. Upon placing the Battery into the charger, the Battery LEDs will alternate for a few seconds as the charger performs a self-diagnostic of the pack status.

5. After the diagnostic is complete, the Battery will begin charging with a single LED flashing. LEDs will become solid in color as charging progresses. The Battery is fully charged when all LEDs are solid.

NOTE: If the initial alternating light pattern continues for more than 10 seconds, the Battery may be too warm or too cold to charge. Unplug the Battery and allow it to stabilize to a normal room temperature and try charging again. Should the Battery still not charge after this, unplug the Battery and contact customer service.

Battery Status

NOTE: LED Legend Indicator:

⚪ = ON

⚫ = OFF

⛭ = FLASH

NOTE: When the Battery is installed or when the appliance is operated, the Battery charge status LEDs will display for 5 seconds and then turn off. If the Battery charge is 10% or less, the LEDs will continue to flash until the unit is no longer in use or the Battery is removed.    

NOTE: It is best to store the Cordless Food Chopper at room temperature.

CLICK HERE to watch a video for more information on Cordless Food Chopper.