Using the Cordless Top Down Chopper

How to Use the Cordless Top Down Chopper?

IMPORTANT: Make sure the Battery is fully charged before using.

Charge the Battery until it is full, using the USB Cable and a USB Adapter, or using the Docking Station (sold separately). Clean all the parts of the Cordless Top Down Chopper.
Lower the Multipurpose Blade in the center of the Bowl until it rests at the bottom.
Add the ingredients to the Bowl. Place the Shield on the Bowl.

Recommended volume: Raw meat (0.25 lb), parmesan cheese (0.25 lb), baking chocolate (0.22 lb).
Place the Motor Body into the Shield until it is seated properly.

NOTE: Make sure the Shield Seal is in place. Do not operate the Chopper without a Shield Seal.
Insert the Battery into the Battery slot located at the back of the appliance, making sure it is aligned. The LED will glow and display the Battery level for five seconds, and then it will turn off.
Press and hold the Button () downward to start. The LED will light and display the Battery level for five seconds, then it will turn off.
IMPORTANT: The Bowl, Shield, and Motor Body must be properly placed for the Cordless Top Down Chopper to operate.
Release the Button () to stop chopping.
IMPORTANT: Do not try to remove the Bowl, Shield, or Motor Body while the Multipurpose Blade is still running.
Once processing is complete, remove the Shield and Multipurpose Blade to empty the Bowl.

NOTE: Use the Storage Lid to store food in the refrigerator.