.png)
.png){kind=icon}
When to Change the Water Filter (Freestanding Ice Maker)
When to Change the Water Filter for Your KitchenAid Undercounter Ice Maker
To enjoy fresh, clean ice for your beverages, it's crucial to know when to change the water filter in undercounter ice maker. Regular replacement of the water filter for ice maker units removes impurities and contaminants, ensuring your ice remains safe and tastes great. In this guide, we'll discuss the importance of maintaining your ice machine water filter, provide a recommended replacement schedule, and explain how to change the filter effectively.
Recommended Replacement Schedule for Water Filters
For efficient operation of your KitchenAid undercounter ice maker, regularly replacing the ice machine water filter is key. A general guideline is to change your water filter every six months, 2000 gallons of water used, when the indicator light comes on, or as needed.
Usage frequency and water quality can affect the lifespan of the water filter for ice maker systems. High usage or hard water can necessitate more frequent changes. If you notice decreased ice production or changes in taste or odor, consider an earlier replacement. Always consult your user manual for model-specific advice to ensure optimal performance and longevity.
NOTE: If the filter is clogged and you are not able to immediately replace it, leave the filter out so the water system is in bypass mode. With the filter removed, the water system will continue to operate, bypassing the filter, and the clogged filter will not cause inadequate performance.
How to Change the Water Filter in Your Undercounter Ice Maker
Knowing when to change the water filter in undercounter ice maker units is essential for ice quality and appliance longevity. Follow these steps for a safe filter change:
- Purchase an approved water filter.
- Take the water filter out of its packaging and remove the cover from the O-rings. Be sure the O-rings are still in place after the cover is removed.
- The water filter compartment is located on the right-hand side of the ice maker controls. If the door is equipped on the 15" (38.1 cm) models, push in on the door to release the latch, and then lower the door.
- Using the arrow pointing to the alignment pin on the side of the filter and the arrow inside the control housing, align the alignment pin with the cutout notch and insert the filter into the housing.
- Turn the filter clockwise until it locks into the housing. Ensure that the alignment arrow on the filter head aligns with the locked symbol on the control box housing. NOTE: If the filter is not correctly locked into the housing, the ice maker will not produce ice.
NOTE: The filter status will automatically reset after the water filter is replaced.
Do more with fresh, filtered water.
Our convenient water filters reduce contaminants to provide refreshing hydration and limitless inspiration—right from your refrigerator. To purchase an
everydrop® water filter, visit your local retailer or visit everydrop® online.
