How to Disassemble the Pasta Press

Disassembling the KitchenAid Pasta Press

1. Turn Stand Mixer OFF and unplug.

2. Remove the Pasta Press attachment from the Stand Mixer.

3. Unscrew the pasta ring to remove. If pasta ring is too tight to remove by hand, slip the wrench side of the combo tool over the grooves, and turn as shown below. Once the pasta ring is off, pop out the pasta plate.

4. Use the combo tool hook to pull the auger from the Pasta Press housing.

IMPORTANT: After removing the auger from the press housing, be sure to clean any dried dough from the auger.
CLICK HERE for more information on cleaning the Pasta Press and attachments.

OPTIONAL: If desired, attach the next pasta plate.
CLICK HERE for more information on attaching the Pasta Press.

NOTE: Allow Stand Mixer to rest for at least one (1) hour after extruding two (2) consecutive pasta dough recipes.